Aluminium and Aluminium Alloy Products
Wrought Aluminium Wire for Electrical Purposes
Strategic Recommendations for Wrought Aluminium Wire for Electrical Purposes — IS 2067 : 1975
- Start BIS Certification Planning Early
Manufacturers and importers should initiate BIS certification under Scheme-I well in advance, considering the phased enforcement starting 1 December 2026, to accommodate testing timelines, factory inspection, and licence approval. - Engage ERA Compliance Experts
ERA’s compliance team provides end-to-end assistance for BIS certification, including application filing, coordination with BIS-recognised laboratories, factory audit readiness, corrective action support, and ISI marking approval to ensure smooth compliance. - Reach Out for Support
For product classification, documentation support, and certification timelines, stakeholders may connect with ERA’s compliance team.
📧 cs@eraglobal.co.in | 📞 +91 9599296331 | 💬 WhatsApp Support Available - Track Gazette Notifications and Amendments
Stay updated with Government notifications, BIS amendments, and enforcement changes by regularly monitoring Gazette publications and subscribing to the ERA Newsletter for timely compliance alerts. - Ensure ISI Marking and Model-wise Control
Only BIS-certified aluminium wires bearing the ISI Mark should be manufactured, imported, or supplied in India. Non-certified or pre-certification stock must be clearly segregated and managed as per notified provisions to avoid regulatory non-compliance.
| Section | Details |
|---|---|
| Product Name | Wrought Aluminium Wire for Electrical Purposes. |
| Applicable Indian Standard (IS) No. | IS 2067:1975. |
| Title of Indian Standard | Wrought Aluminium Wire for Electrical Purposes. |
| QCO Coverage | Covered under Aluminium and Aluminium Alloy Products (Quality Control) regulatory framework. |
| Latest Governing Notification | Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026 – S.O. 1319(E), dated 11 March 2026, issued by the Department for Promotion of Industry and Internal Trade (DPIIT), Ministry of Commerce and Industry. |
| Supersession History | Supersedes the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2025, except for actions taken prior to such supersession. |
| Enforcement Date (Category-wise) |
General Enterprises: 1 December 2026, Small Enterprises: 1 March 2027, Micro Enterprises: 1 June 2027. |
| Objective & Scope | To ensure that wrought aluminium wires used in electrical applications meet prescribed standards for conductivity, mechanical strength, dimensional consistency, and safety, ensuring reliable electrical performance and durability. |
| Products Covered | Wrought aluminium wires used for electrical applications including transmission, distribution, and general electrical engineering purposes, conforming to IS 2067:1975. |
| Exemptions | Goods manufactured exclusively for export and imports up to 200 kilograms per year for research and development purposes, subject to conditions specified in the Order. |
| Industries Impacted | Aluminium wire manufacturers, electrical equipment manufacturers, power transmission and distribution companies, EPC contractors, OEM suppliers, importers, and distributors. |
| Mandatory Compliance | Products must conform to IS 2067:1975 and bear the Standard Mark (ISI Mark) under a valid BIS licence (Scheme-I) before manufacture, import, sale, or distribution in India. |
| Certification, Enforcement & Legal Framework | Certification and enforcement are administered by the Bureau of Indian Standards (BIS) under the Bureau of Indian Standards Act, 2016 and BIS (Conformity Assessment) Regulations, 2018. |
| Penalties for Non-Compliance | Violations are punishable under the BIS Act, 2016, including imprisonment up to two years, monetary fines starting from ₹2 lakh and extendable up to ten times the value of goods, or both, along with additional penalties for continuing violations. |
| Supersession & Amendment Clause | The latest version of IS 2067, including amendments notified by BIS from time to time, applies automatically from the date of such notification. |
| Next Steps for Stakeholders | Identify applicable aluminium wire products, verify conformity with IS 2067:1975, apply for BIS certification, conduct testing through BIS-recognised laboratories, complete factory inspection and documentation, obtain BIS licence, affix ISI Mark, ensure only certified products are manufactured, imported, or supplied before applicable enforcement dates. |
| Conclusion | BIS certification for Wrought Aluminium Wire for Electrical Purposes as per IS 2067:1975 becomes mandatory from the notified enforcement dates under the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026. Timely compliance ensures uninterrupted market access and avoids regulatory penalties. |
Ready to start your certification journey?
Let us help you navigate regulatory challenges and achieve certification with ease. Leave us your details, and we’ll get back to you—or request a free consultation today.
Get in touch with us today
Notification
Wrought Aluminium Wire for Electrical Purposes has been brought under mandatory quality control through the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026, notified vide S.O. 1319(E) dated 11 March 2026 by the Department for Promotion of Industry and Internal Trade (DPIIT), Ministry of Commerce and Industry. The Order supersedes the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2025, except in respect of actions taken or omitted before such supersession. The regulation mandates conformity to IS 2067:1975 – Wrought Aluminium Wire for Electrical Purposes.
Enforcement Timeline
As per the implementation schedule notified in S.O. 1319(E) dated 11 March 2026, mandatory compliance applies from 1 December 2026 for general enterprises, 1 March 2027 for small enterprises, and 1 June 2027 for micro enterprises for products covered under IS 2067:1975.
Overview
The regulatory framework requires wrought aluminium wires used in electrical applications to comply with defined technical and quality requirements. IS 2067:1975 specifies essential parameters such as electrical conductivity, tensile strength, dimensional accuracy, surface quality, and performance characteristics suitable for power transmission, distribution, and general electrical engineering use. The measure aims to ensure safety, reliability, and efficiency of electrical systems while eliminating substandard products from the market.
Objective & Scope
The primary objective is to ensure that aluminium wires used in electrical applications meet uniform quality, safety, and performance standards. The scope covers manufacture, import, sale, and distribution of wrought aluminium electrical wires in India. Products manufactured exclusively for export are outside the domestic compliance requirement, subject to declared conditions.
Products Covered
The regulation applies to wrought aluminium wires used for electrical purposes, including applications in transmission lines, distribution networks, electrical conductors, and general engineering electrical uses falling within the scope of IS 2067:1975.
Exemptions Provided
Limited exemptions are provided for goods manufactured exclusively for export and for imports up to 200 kilograms per year for research and development purposes, subject to conditions that such products are not sold commercially and are disposed of as scrap with proper record maintenance.
Industries Impacted
The regulation directly impacts aluminium wire manufacturers, electrical equipment manufacturers, power transmission and distribution companies, EPC contractors, infrastructure developers, OEM suppliers, importers, and distributors.
Mandatory Compliance Requirements
Manufacturers and importers must obtain BIS certification under Scheme-I, ensure product testing through BIS-recognised laboratories, comply with factory inspection and quality control requirements, and affix the ISI Mark on compliant products before they are manufactured, imported, sold, or distributed in the Indian market.
Next Steps for Stakeholders
Stakeholders should identify applicable product models, initiate the BIS licence application process, align manufacturing processes with IS 2067:1975 requirements, arrange product testing through approved laboratories, and complete certification before the applicable enforcement dates to ensure uninterrupted market operations.
Legal Provisions & Penalties
Certification and enforcement are administered by the Bureau of Indian Standards (BIS) under the provisions of the Bureau of Indian Standards Act, 2016. Non-compliance may result in penalties including imprisonment up to two years, monetary fines starting from ₹2 lakh and extending up to ten times the value of goods, or both, along with additional penalties for continuing violations.
Conclusion
Compliance with IS 2067:1975 and BIS certification is mandatory for Wrought Aluminium Wire for Electrical Purposes from the notified enforcement dates under the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026. Timely compliance ensures regulatory adherence, market continuity, and improved safety and reliability in electrical applications.
Ready to start your certification journey?
Let us help you navigate regulatory challenges and achieve certification with ease. Leave us your details, and we’ll get back to you—or request a free consultation today.
Pingback: finasteride rxlist
Pingback: fluconazole 150 mg for uti
Pingback: zoloft generic 25 mg
Pingback: doxycycline 100 mg for dogs