Aluminium and Aluminium Alloy Products
Wrought Aluminium and Aluminium Alloys (Extruded Round Tube and Hollow Sections for General Engineering Purposes)
Strategic Recommendations for Wrought Aluminium and Aluminium Alloys — Extruded Round Tube and Hollow Sections (IS 1285 : 2002)
Start BIS Certification Planning Early
Manufacturers and importers should initiate BIS certification under Scheme-I well in advance, considering the phased enforcement starting 1 December 2026, to accommodate testing timelines, factory inspection, and approval processes.Engage ERA Compliance Experts
ERA’s compliance team provides end-to-end support for BIS certification, including application filing, coordination with BIS-recognised laboratories, factory audit readiness, corrective action support, and ISI marking approval to ensure smooth and timely compliance.Reach Out for Support
For product classification, documentation guidance, and certification timelines, stakeholders may directly connect with ERA’s compliance team.
📧 cs@eraglobal.co.in | 📞 +91 9599296331 | 💬 WhatsApp Support AvailableTrack Gazette Notifications and Amendments
Stay updated on future Government notifications, BIS amendments, and enforcement developments by regularly tracking Gazette publications and subscribing to the ERA Newsletter for timely regulatory alerts and compliance updates.Ensure ISI Marking and Model-wise Control
Only BIS-certified extruded aluminium tubes and hollow sections bearing the ISI Mark should be manufactured, imported, or supplied in India. Non-certified or transitional stock must be clearly segregated and managed in accordance with notified provisions.
| Section | Details |
|---|---|
| Product Name | Wrought Aluminium and Aluminium Alloys – Extruded Round Tube and Hollow Sections |
| Applicable Indian Standard (IS) No. | IS 1285:2002 |
| Title of Indian Standard | Wrought Aluminium and Aluminium Alloys – Extruded Round Tube and Hollow Sections for General Engineering Purposes |
| QCO Coverage | Covered under Aluminium and Aluminium Alloy Products (Quality Control) regulatory framework |
| Latest Governing Notification | Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026 – S.O. 1319(E), dated 11 March 2026, issued by the Department for Promotion of Industry and Internal Trade (DPIIT), Ministry of Commerce and Industry |
| Supersession History | Supersedes the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2025, except for actions taken prior to such supersession |
| Enforcement Date (Category-wise) |
General Enterprises: 1 December 2026, Small Enterprises: 1 March 2027, Micro Enterprises: 1 June 2027. |
| Objective & Scope | To ensure that extruded aluminium tubes and hollow sections used in general engineering applications meet specified requirements for dimensional accuracy, mechanical properties, surface quality, and structural integrity, ensuring reliability and consistency in industrial usage. |
| Products Covered | Extruded round tubes and hollow sections made of wrought aluminium and aluminium alloys used for general engineering purposes, conforming to IS 1285:2002. |
| Exemptions | Goods manufactured exclusively for export and limited imports up to 200 kilograms per year for research and development purposes, subject to conditions specified in the Order. |
| Industries Impacted | Aluminium extrusion manufacturers, engineering component manufacturers, infrastructure and construction suppliers, OEMs, industrial equipment manufacturers, importers, distributors, and fabrication units. |
| Mandatory Compliance | Products must conform to IS 1285:2002 and bear the Standard Mark (ISI Mark) under a valid BIS licence (Scheme-I) before manufacture, import, sale, or distribution in India. |
| Certification, Enforcement & Legal Framework | Certification and enforcement are administered by the Bureau of Indian Standards (BIS) under the Bureau of Indian Standards Act, 2016 and BIS (Conformity Assessment) Regulations, 2018. |
| Penalties for Non-Compliance | Violations are punishable under the BIS Act, 2016, including imprisonment up to two years, fines starting from ₹2 lakh and extendable up to ten times the value of goods, or both, along with additional penalties for continuing offences. |
| Supersession & Amendment Clause | The latest version of IS 1285, including amendments notified by BIS from time to time, applies automatically from the date of such notification. |
| Next Steps for Stakeholders | Identify applicable extrusion products, verify compliance with IS 1285:2002, apply for BIS certification, conduct testing through BIS-recognised laboratories, complete factory inspection, obtain BIS licence, affix ISI Mark, ensure only certified products are supplied before applicable enforcement dates. |
| Conclusion | BIS certification for extruded aluminium round tubes and hollow sections as per IS 1285:2002 becomes mandatory from the notified enforcement dates under the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026. Timely compliance ensures uninterrupted market access and regulatory adherence. |
Ready to start your certification journey?
Let us help you navigate regulatory challenges and achieve certification with ease. Leave us your details, and we’ll get back to you—or request a free consultation today.
Get in touch with us today
Notification
Wrought Aluminium and Aluminium Alloys – Extruded Round Tube and Hollow Sections for General Engineering Purposes have been brought under mandatory quality control through the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026, notified vide S.O. 1319(E) dated 11 March 2026 by the Department for Promotion of Industry and Internal Trade (DPIIT), Ministry of Commerce and Industry. The Order supersedes the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2025, except in respect of actions taken or omitted before such supersession. The regulation mandates conformity to IS 1285:2002 – Wrought Aluminium and Aluminium Alloys – Extruded Round Tube and Hollow Sections for General Engineering Purposes.
Enforcement Timeline
As per the implementation schedule specified in S.O. 1319(E) dated 11 March 2026, mandatory compliance applies from 1 December 2026 for general enterprises, 1 March 2027 for small enterprises, and 1 June 2027 for micro enterprises.
Overview
The regulatory framework requires extruded aluminium round tubes and hollow sections used in general engineering applications to comply with defined quality and performance requirements. IS 1285:2002 specifies key parameters such as dimensional tolerances, mechanical properties, surface finish, and structural integrity, ensuring reliability and uniformity of aluminium extrusion products used across industrial and engineering applications.
Objective & Scope
The primary objective is to ensure that aluminium extruded tubes and hollow sections meet consistent quality and safety standards for use in engineering, infrastructure, and industrial applications. The scope covers the manufacture, import, sale, and distribution of such products in India. Products manufactured exclusively for export are outside the domestic compliance requirement, subject to declared conditions.
Products Covered
The regulation applies to extruded round tubes and hollow sections made of wrought aluminium and aluminium alloys used for general engineering purposes, falling within the scope of IS 1285:2002.
Exemptions Provided
Limited exemptions are provided for goods manufactured exclusively for export and for imports up to 200 kilograms per year for research and development purposes, provided such products are not sold commercially and are disposed of as scrap with proper record maintenance.
Industries Impacted
The regulation impacts aluminium extrusion manufacturers, engineering component manufacturers, infrastructure and construction suppliers, OEMs, fabrication units, industrial equipment manufacturers, importers, and distributors involved in aluminium-based products.
Mandatory Compliance Requirements
Manufacturers and importers are required to obtain BIS certification under Scheme-I, ensure product testing through BIS-recognised laboratories, comply with factory inspection and quality control requirements, and affix the ISI Mark on compliant products before sale or distribution in India.
Next Steps for Stakeholders
Stakeholders should identify all applicable extrusion products, initiate the BIS certification process, arrange testing through recognised laboratories, align manufacturing and quality systems with IS 1285:2002, and complete certification well before the applicable enforcement dates to ensure uninterrupted market access.
Legal Provisions & Penalties
Certification and enforcement are administered by the Bureau of Indian Standards (BIS) under the provisions of the Bureau of Indian Standards Act, 2016. Non-compliance may lead to penalties including imprisonment up to two years, fines starting from ₹2 lakh and extending up to ten times the value of goods, or both, along with additional penalties for continuing violations.
Conclusion
Compliance with IS 1285:2002 and BIS certification is mandatory for extruded aluminium round tubes and hollow sections from the notified enforcement dates under the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026. Timely compliance ensures regulatory adherence, uninterrupted market operations, and consistent product quality across engineering applications.
Ready to start your certification journey?
Let us help you navigate regulatory challenges and achieve certification with ease. Leave us your details, and we’ll get back to you—or request a free consultation today.
Pingback: doxycycline hyclate 100 mg capsule
Pingback: tetraciclinas
Pingback: sertraline tablets
Pingback: zudena 100 mg tablet