Aluminium and Aluminium Alloy Products
Aluminium alloy tube for irrigation purposes – extruded tube
Strategic Recommendations for Aluminium Alloy Tubes for Irrigation Purposes (Extruded Tubes) — IS 7092 (Part 2) : 1987
- Start BIS Certification Immediately
Manufacturers and importers should initiate BIS certification under Scheme-I without delay, as compliance with IS 7092 (Part 2):1987 has been mandated with immediate effect under the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026. - Engage ERA Compliance Experts
ERA’s compliance team provides end-to-end support for BIS certification, including application filing, coordination with BIS-recognised laboratories, factory audit preparation, corrective action support, and ISI marking approval to ensure smooth and timely compliance. - Reach Out for Support
For product eligibility verification, documentation guidance, and certification timelines, stakeholders may directly connect with ERA’s compliance team.
📧 cs@eraglobal.co.in | 📞 +91 9599296331 | 💬 WhatsApp Support Available - Track Gazette Notifications and Amendments
Stay updated on future Government notifications, BIS amendments, and regulatory updates by regularly tracking Gazette publications and subscribing to the ERA Newsletter for timely compliance alerts and policy developments. - Ensure ISI Marking and Model-wise Control
Only BIS-certified aluminium alloy extruded irrigation tubes bearing the ISI Mark should be manufactured, imported, or supplied in India. Non-certified or transitional stock must be strictly segregated and managed in accordance with notified regulatory provisions.
| Section | Details |
|---|---|
| Product Name | Aluminium Alloy Tubes for Irrigation Purposes – Extruded Tubes |
| Applicable Indian Standard (IS) No. | IS 7092 (Part 2):1987 |
| Title of Indian Standard | Aluminium Alloy Tubes for Irrigation Purposes – Extruded Tubes |
| QCO Coverage | Covered under Aluminium and Aluminium Alloy Products (Quality Control) regulatory framework |
| Latest Governing Notification | Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026 – S.O. 1319(E), dated 11 March 2026, issued by the Department for Promotion of Industry and Internal Trade (DPIIT), Ministry of Commerce and Industry |
| Supersession History | Supersedes the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2025, except for actions taken prior to such supersession |
| Enforcement Date (Category-wise) |
General Enterprises: With Immediate Effect Small Enterprises: With Immediate Effect Micro Enterprises: With Immediate Effect |
| Objective & Scope | To ensure that aluminium alloy extruded tubes used in irrigation systems meet prescribed requirements for material composition, dimensional tolerances, mechanical strength, corrosion resistance, and operational reliability in agricultural irrigation infrastructure. |
| Products Covered | Aluminium alloy extruded tubes used for irrigation pipelines, sprinkler irrigation systems, and agricultural water distribution systems conforming to IS 7092 (Part 2):1987. |
| Exemptions | Goods manufactured exclusively for export and limited imports up to 200 kilograms per year for research and development purposes, subject to conditions specified in the Order. |
| Industries Impacted | Aluminium extrusion manufacturers, irrigation equipment manufacturers, agricultural infrastructure suppliers, OEM component manufacturers, importers, distributors, irrigation system contractors, and agricultural pipeline suppliers. |
| Mandatory Compliance | Products must conform to IS 7092 (Part 2):1987 and bear the Standard Mark (ISI Mark) under a valid BIS licence (Scheme-I) before manufacture, import, sale, or distribution in India. |
| Certification, Enforcement & Legal Framework | Certification and enforcement are carried out by the Bureau of Indian Standards (BIS) under the provisions of the Bureau of Indian Standards Act, 2016 and BIS (Conformity Assessment) Regulations, 2018. |
| Penalties for Non-Compliance | Violations are punishable under the BIS Act, 2016, including imprisonment up to two years, monetary fines starting from ₹2 lakh and extending up to ten times the value of goods, or both, along with additional penalties for continuing offences. |
| Supersession & Amendment Clause | The latest version of the applicable Indian Standard, including amendments notified by BIS from time to time, applies automatically from the date of such notification. |
| Next Steps for Stakeholders |
Identify applicable aluminium irrigation tube models, Verify conformity with IS 7092 (Part 2):1987, Apply for BIS certification, Conduct testing in BIS-recognised laboratories, Complete factory inspection and documentation, Obtain BIS licence , affix ISI Mark , ensure only certified products are manufactured, imported, or supplied in the Indian market. |
| Conclusion | BIS certification for Aluminium Alloy Tubes for Irrigation Purposes (Extruded Tubes) as per IS 7092 (Part 2):1987 is mandatory with immediate effect under the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026, ensuring quality and reliability of irrigation infrastructure products in the Indian market. |
Ready to start your certification journey?
Let us help you navigate regulatory challenges and achieve certification with ease. Leave us your details, and we’ll get back to you—or request a free consultation today.
Get in touch with us today
Notification
Aluminium Alloy Tubes for Irrigation Purposes (Extruded Tubes) have been brought under mandatory quality control through the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026, notified vide S.O. 1319(E) dated 11 March 2026 by the Department for Promotion of Industry and Internal Trade (DPIIT), Ministry of Commerce and Industry. The Order supersedes the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2025, except in respect of actions taken or omitted before such supersession. The regulation mandates conformity to IS 7092 (Part 2):1987 – Aluminium Alloy Tubes for Irrigation Purposes – Extruded Tubes.
Enforcement Timeline
As specified in the implementation schedule of S.O. 1319(E) dated 11 March 2026, mandatory compliance for IS 7092 (Part 2):1987 applies with immediate effect for general enterprises, small enterprises, and micro enterprises.
Overview
The regulatory framework requires aluminium alloy extruded tubes used in irrigation systems to comply with prescribed quality and performance standards. IS 7092 (Part 2):1987 defines technical requirements including material composition, dimensional tolerances, mechanical strength, and durability suitable for agricultural irrigation infrastructure. The measure aims to ensure the reliability and safety of irrigation pipeline systems while preventing the circulation of substandard aluminium tube products in the Indian market.
Objective & Scope
The primary objective of the regulation is to ensure that aluminium alloy extruded tubes used for irrigation applications meet consistent quality and safety standards. The scope covers the manufacture, import, sale, and distribution of aluminium alloy extruded irrigation tubes in India. Products manufactured exclusively for export are outside the domestic compliance requirement, subject to declared conditions.
Products Covered
The regulation applies to aluminium alloy extruded tubes designed for irrigation purposes, including pipeline systems used for agricultural water distribution, sprinkler irrigation systems, and related irrigation infrastructure that fall within the technical scope of IS 7092 (Part 2):1987.
Exemptions Provided
Limited exemptions are provided for goods manufactured exclusively for export and for imports up to 200 kilograms per year for research and development purposes, provided such products are not sold commercially and are disposed of as scrap after use, with proper records maintained by the manufacturer.
Industries Impacted
The regulation directly impacts aluminium extrusion manufacturers, irrigation equipment manufacturers, agricultural infrastructure suppliers, OEM component manufacturers, importers, distributors, irrigation system contractors, and agricultural pipeline suppliers involved in irrigation water distribution systems.
Mandatory Compliance Requirements
Manufacturers and importers are required to obtain BIS certification under Scheme-I, ensure testing of products in BIS-recognised laboratories, comply with factory inspection and quality control requirements, and affix the ISI Mark on each compliant product before it is manufactured, imported, sold, or distributed in the Indian market.
Next Steps for Stakeholders
Stakeholders should identify applicable product models under IS 7092 (Part 2):1987, initiate the BIS licence application process, arrange testing through BIS-recognised laboratories, align manufacturing processes with the standard’s technical requirements, and complete certification procedures to ensure uninterrupted market supply.
Legal Provisions & Penalties
Certification and enforcement are administered by the Bureau of Indian Standards (BIS) under the provisions of the Bureau of Indian Standards Act, 2016. Non-compliance with the notified requirements may result in penalties including imprisonment up to two years, monetary fines starting from ₹2 lakh and extending up to ten times the value of goods, or both, along with additional penalties for continuing violations.
Conclusion
Compliance with IS 7092 (Part 2):1987 and BIS certification is mandatory for Aluminium Alloy Tubes for Irrigation Purposes (Extruded Tubes) with immediate enforcement under the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026. Timely certification ensures regulatory compliance, uninterrupted market access, and improved reliability of irrigation infrastructure products in India.
Ready to start your certification journey?
Let us help you navigate regulatory challenges and achieve certification with ease. Leave us your details, and we’ll get back to you—or request a free consultation today.