Specification for Self - Aligning Roller Bearings.
Self - Aligning Roller Bearings
Strategic Recommendations for Self - Aligning Roller Bearings IS 6454:1972
Start BIS Certification Preparation Immediately
Prepare for BIS certification under IS 6454:1972 in advance, as the draft Bearings (Quality Control) Order, 2025 is currently under process and may become mandatory upon final notification.
Engage ERA Compliance Experts
ERA’s team can guide with applications, testing, ISI marking, and audit readiness for seamless compliance.
Reach Out for Support
📧 cs@eraglobal.co.in | 📞 +91 9599296331 | 💬 WhatsApp – Assistance with certification, inspections, and compliance queries.
Track QCO Updates & Subscribe ERA Newsletter
Subscribe to the ERA Newsletter for updates on Government Gazette notifications, amendments to the draft Bearings (Quality Control) Order, 2025, and BIS compliance deadlines.
Ensure ISI Marking & Test Certification
Upon enforcement of the final QCO, all consignments must carry the ISI mark and a valid BIS Test Certificate before sale or use in India. Non-conforming material must be handled as per BIS Act provisions.
| Section | Details |
|---|---|
| Product Name | Self - Aligning Roller Bearings. |
| Applicable Indian Standard (IS) No. | IS 6454:1972. |
| Title of IS | Specification for Self - Aligning Roller Bearings. |
| ITC (HS) Codes | 84823000. |
| QCO Coverage | Proposed to be covered under the draft Bearings (Quality Control) Order, 2025. |
| Notification & Amendments | Draft Bearings (Quality Control) Order, 2025 issued by the Department for Promotion of Industry & Internal Trade (DPIIT), Ministry of Commerce and Industry. |
| Final Enforcement Date | Draft QCO under process. Proposed implementation timelines applicable after final notification. |
| Objective & Scope | To ensure quality, dimensional accuracy, load-bearing capability, operational reliability, and safety of self-aligning roller bearings used in industrial and heavy-duty applications. |
| Products Covered | Self - aligning roller bearings covered under IS 6454:1972 used in industrial machinery, heavy equipment, mining machinery, conveyor systems, power transmission systems, and rotating industrial applications. |
| Exemptions | Products manufactured domestically solely for export are exempt. Up to 200 units imported annually for research and development purposes are exempt subject to non-commercial usage and maintenance of prescribed records. |
| Industries Impacted | Bearing Manufacturing, Heavy Engineering, Mining Equipment, Cement Industry, Steel Plants, Industrial Machinery, Power Transmission, Construction Equipment, Railways. |
| Mandatory Compliance | Products will be required to bear the Standard Mark (ISI Mark) under a valid BIS license as per Scheme-I of Schedule-II of BIS (Conformity Assessment) Regulations, 2018.- Compliance with IS 6454:1972 will become mandatory after enforcement of the final QCO.- Manufacturers and importers will be required to ensure BIS-approved testing and certification compliance. |
| Next Steps for Stakeholders | Prepare for BIS certification under Scheme-I. Conduct testing as per IS 6454:1972 requirements. Review quality assurance systems and manufacturing controls. Maintain technical documentation and testing records. Monitor final gazette notification and enforcement timelines. |
| Legal Framework & Penalties | Governed under Sections 16, 17, and 25(3) of the BIS Act, 2016. BIS will act as the certifying and enforcement authority upon final notification. |
| Penalties for Non-Compliance | Upon enforcement, violations may attract imprisonment up to 2 years or fine not less than ₹2 lakh (extendable up to 10× the value of goods) or both under the BIS Act, 2016. Continuing offences may attract additional daily penalties. |
| Supersession & Amendment Clause | The latest version of IS 6454:1972 and amendments notified by BIS from time to time shall apply automatically. |
| Conclusion | Self - Aligning Roller Bearings proposed under IS 6454:1972 are presently covered under a draft QCO under process. Manufacturers, importers, and stakeholders should proactively prepare for BIS certification and future compliance obligations once the final notification is issued. |
| References/Annexures | Draft Bearings (Quality Control) Order, 2025; BIS Act, 2016; IS 6454:1972. |
Notification
The product Self – Aligning Roller Bearings, classified under ITC (HS) Code 84823000, has been proposed to be brought under mandatory quality control through the draft Bearings (Quality Control) Order, 2025 issued by the Department for Promotion of Industry & Internal Trade (DPIIT), Ministry of Commerce and Industry. The draft order proposes mandatory compliance with IS 6454:1972 for self-aligning roller bearings.
Enforcement Timeline
Notification Status: Draft QCO under process.
General Implementation: Six months from the date of publication of the final order.
Small Enterprises: Nine months from the date of publication of the final order.
Micro Enterprises: Twelve months from the date of publication of the final order.
Enforcement: Will become applicable after publication of the final QCO notification in the Official Gazette.
Overview
The proposed regulation aims to ensure the quality, dimensional consistency, operational efficiency, and durability of self-aligning roller bearings used in heavy-duty industrial applications. The draft QCO seeks to eliminate substandard bearings from the market and improve safety and reliability across industrial and infrastructure sectors.
Objective & Scope
The draft order intends to mandate compliance with IS 6454:1972 to ensure standardized manufacturing practices, high load-bearing performance, self-alignment capability, and operational reliability of roller bearings used in industrial rotating equipment and heavy machinery.
Products Covered
Applies specifically to self – aligning roller bearings covered under IS 6454:1972 used in:
- Industrial machinery
- Heavy engineering equipment
- Mining machinery
- Conveyor systems
- Power transmission systems
- Cement and steel plants
- Construction equipment
- Railway applications.
Exemptions Provided
Products manufactured solely for export, conforming to foreign buyer specifications, are exempt.
Additionally, up to 200 units imported annually for research and development purposes are exempt subject to:
- Non-commercial use
- Disposal as scrap after usage
- Maintenance of year-wise records
- Furnishing records to the Central Government when required.
Industries Impacted
Bearing Manufacturing
Heavy Engineering
Mining Equipment
Cement Industry
Steel Plants
Industrial Machinery
Power Transmission
Construction Equipment
Railways
Mandatory Compliance Requirements
Compliance with IS 6454:1972 will become mandatory after enforcement of the final QCO.
Certification will be under Scheme-I of Schedule-II of BIS (Conformity Assessment) Regulations, 2018.
Manufacturers and importers will need to maintain technical documentation and testing records.
BIS-approved testing and conformity assessment procedures will apply.
Legal Provisions , Enforcement & Penalties
- Imprisonment up to 2 years, or
- Fine of not less than ₹2 lakh (extendable up to 10× the value of goods), or both.
Conclusion
The draft Bearings (Quality Control) Order, 2025 proposes mandatory BIS certification for Self – Aligning Roller Bearings under IS 6454:1972. Although the QCO is currently under process and not yet mandatory, stakeholders should proactively prepare for testing, certification, quality compliance, and ISI marking requirements to ensure readiness once officially enforced.
Ready to start your certification journey?
Let us help you navigate regulatory challenges and achieve certification with ease. Leave us your details, and we’ll get back to you—or request a free consultation today.