Specification for Double Row Radial Ball Bearings.
Double Row Radial Ball Bearings
Strategic Recommendations for Double Row Radial Ball Bearings IS 6456:1972
- Start BIS Certification Preparation Immediately
Prepare for BIS certification under IS 6456:1972 in advance, as the draft Bearings (Quality Control) Order, 2025 is currently under process and may become mandatory upon final notification.
- Engage ERA Compliance Experts
ERA’s team can guide with applications, testing, ISI marking, and audit readiness for seamless compliance.
- Reach Out for Support
📧 cs@eraglobal.co.in | 📞 +91 9599296331 | 💬 WhatsApp – Assistance with certification, inspections, and compliance queries.
- Track QCO Updates & Subscribe ERA Newsletter
Subscribe to the ERA Newsletter for updates on Government Gazette notifications, amendments to the draft Bearings (Quality Control) Order, 2025, and BIS compliance deadlines.
- Ensure ISI Marking & Test Certification
Upon enforcement of the final QCO, all consignments must carry the ISI mark and a valid BIS Test Certificate before sale or use in India. Non-conforming material must be handled as per BIS Act provisions.
| Section | Details |
|---|---|
| Product Name | Double Row Radial Ball Bearings. |
| Applicable Indian Standard (IS) No. | IS 6456:1972. |
| Title of IS | Specification for Double Row Radial Ball Bearings. |
| ITC (HS) Codes | 84821090. |
| QCO Coverage | Proposed to be covered under the draft Bearings (Quality Control) Order, 2025. |
| Notification & Amendments | Draft Bearings (Quality Control) Order, 2025 issued by the Department for Promotion of Industry & Internal Trade (DPIIT), Ministry of Commerce and Industry. |
| Final Enforcement Date | Draft QCO under process. Proposed implementation timelines applicable after final notification. |
| Objective & Scope | To ensure quality, dimensional accuracy, load-bearing capability, rotational efficiency, durability, and operational reliability of double row radial ball bearings used across industrial and automotive applications. |
| Products Covered | Double row radial ball bearings covered under IS 6456:1972 used in industrial machinery, automotive assemblies, electric motors, pumps, compressors, conveyors, and rotating equipment. |
| Exemptions | Products manufactured domestically solely for export are exempt. Up to 200 units imported annually for research and development purposes are exempt subject to non-commercial usage and maintenance of prescribed records. |
| Industries Impacted | Bearing Manufacturing, Automotive Industry, Industrial Machinery, Electric Motors, Heavy Engineering, Pumps & Compressors, Power Transmission, Railways, Construction Equipment. |
| Mandatory Compliance | Products will be required to bear the Standard Mark (ISI Mark) under a valid BIS license as per Scheme-I of Schedule-II of BIS (Conformity Assessment) Regulations, 2018.- Compliance with IS 6456:1972 will become mandatory after enforcement of the final QCO.- Manufacturers and importers will be required to ensure BIS-approved testing and certification compliance. |
| Next Steps for Stakeholders | Prepare for BIS certification under Scheme-I. Conduct testing as per IS 6456:1972 requirements. Review quality assurance systems and manufacturing controls. Maintain technical documentation and testing records. Monitor final gazette notification and enforcement timelines. |
| Legal Framework & Penalties | Governed under Sections 16, 17, and 25(3) of the BIS Act, 2016. BIS will act as the certifying and enforcement authority upon final notification. |
| Penalties for Non-Compliance | Upon enforcement, violations may attract imprisonment up to 2 years or fine not less than ₹2 lakh (extendable up to 10× the value of goods) or both under the BIS Act, 2016. Continuing offences may attract additional daily penalties. |
| Supersession & Amendment Clause | The latest version of IS 6456:1972 and amendments notified by BIS from time to time shall apply automatically. |
| Conclusion | Double Row Radial Ball Bearings proposed under IS 6456:1972 are presently covered under a draft QCO under process. Manufacturers, importers, and stakeholders should proactively prepare for BIS certification and future compliance obligations once the final notification is issued. |
| References/Annexures | Draft Bearings (Quality Control) Order, 2025; BIS Act, 2016; IS 6456:1972. |
Notification
The product Double Row Radial Ball Bearings, classified under ITC (HS) Code 84821090, has been proposed to be brought under mandatory quality control through the draft Bearings (Quality Control) Order, 2025 issued by the Department for Promotion of Industry & Internal Trade (DPIIT), Ministry of Commerce and Industry. The draft order proposes mandatory compliance with IS 6456:1972 for double row radial ball bearings.
Enforcement Timeline
Notification Status: Draft QCO under process.
General Implementation: Six months from the date of publication of the final order.
Small Enterprises: Nine months from the date of publication of the final order.
Micro Enterprises: Twelve months from the date of publication of the final order.
Enforcement: Will become applicable after publication of the final QCO notification in the Official Gazette.
Overview
The proposed regulation aims to ensure the quality, dimensional consistency, rotational efficiency, durability, and operational reliability of double row radial ball bearings used in industrial, automotive, and rotating machinery applications. The draft QCO seeks to eliminate substandard bearings from the domestic market and improve product reliability and safety across industrial sectors.
Objective & Scope
The draft order intends to mandate compliance with IS 6456:1972 to ensure standardized manufacturing practices, efficient load distribution, rotational stability, durability, and operational performance of double row radial ball bearings used in machinery and equipment.
Products Covered
Applies specifically to double row radial ball bearings covered under IS 6456:1972 used in:
- Industrial machinery
- Automotive assemblies
- Electric motors
- Pumps and compressors
- Conveyor systems
- Heavy engineering equipment
- Rotating industrial equipment
- Power transmission systems.
Exemptions Provided
Products manufactured solely for export, conforming to foreign buyer specifications, are exempt.
Additionally, up to 200 units imported annually for research and development purposes are exempt subject to:
- Non-commercial use
- Disposal as scrap after usage
- Maintenance of year-wise records
- Furnishing records to the Central Government when required
Industries Impacted
Automotive Industry
Industrial Machinery
Electric Motors
Heavy Engineering
Pumps & Compressors
Power Transmission
Railways
Construction Equipment.
Mandatory Compliance Requirements
Compliance with IS 6456:1972 will become mandatory after enforcement of the final QCO.
Certification will be under Scheme-I of Schedule-II of BIS (Conformity Assessment) Regulations, 2018.
Manufacturers and importers will need to maintain technical documentation and testing records.
BIS-approved testing and conformity assessment procedures will apply.
Legal Provisions , Enforcement & Penalties
The proposed order is issued under Sections 16, 17, and 25(3) of the BIS Act, 2016. BIS will act as the certifying and enforcement authority upon final notification.
Violation after enforcement may attract penalties under Section 29 of the BIS Act, 2016, including:
- Imprisonment up to 2 years, or
- Fine of not less than ₹2 lakh (extendable up to 10× the value of goods), or both.
For continuing offences, additional daily penalties may also apply under the BIS Act.
Conclusion
The draft Bearings (Quality Control) Order, 2025 proposes mandatory BIS certification for Double Row Radial Ball Bearings under IS 6456:1972. Although the QCO is currently under process and not yet mandatory, stakeholders should proactively prepare for testing, certification, quality compliance, and ISI marking requirements to ensure readiness once officially enforced.
Ready to start your certification journey?
Let us help you navigate regulatory challenges and achieve certification with ease. Leave us your details, and we’ll get back to you—or request a free consultation today.