Rolling Bearings — Accessories Part 1 Dimensions for Adapter Sleeve Assemblies and Withdrawal Sleeves.
Rolling Bearings Accessories Dimensions for Adapter Sleeve Assemblies and Withdrawal Sleeves
Strategic Recommendations for Rolling Bearings Accessories Dimensions for Adapter Sleeve Assemblies and Withdrawal Sleeves IS 16605 (Part 1):2018 / ISO 2982-1:2013
Start BIS Certification Preparation Immediately
Prepare for BIS certification under IS 16605 (Part 1):2018 / ISO 2982-1:2013 in advance, as the draft Bearing Components and Accessories (Quality Control) Order, 2025 is currently under process and may become mandatory upon final notification.
Engage ERA Compliance Experts
ERA’s team can guide with applications, testing, ISI marking, and audit readiness for seamless compliance.
Reach Out for Support
📧 cs@eraglobal.co.in | 📞 +91 9599296331 | 💬 WhatsApp – Assistance with certification, inspections, and compliance queries.
Track QCO Updates & Subscribe ERA Newsletter
Subscribe to the ERA Newsletter for updates on Government Gazette notifications, amendments to the draft Bearing Components and Accessories QCO, 2025, and BIS compliance deadlines.
Ensure ISI Marking & Test Certification
Upon enforcement of the final QCO, all consignments must carry the ISI mark and a valid BIS Test Certificate before sale or use in India. Non-conforming material must be handled as per BIS Act provisions.
| Section | Details |
|---|---|
| Product Name | Rolling Bearings Accessories Dimensions for Adapter Sleeve Assemblies and Withdrawal Sleeves. |
| Applicable Indian Standard (IS) No. | IS 16605 (Part 1):2018 / ISO 2982-1:2013. |
| Title of IS | Rolling Bearings — Accessories Part 1 Dimensions for Adapter Sleeve Assemblies and Withdrawal Sleeves. |
| ITC (HS) Codes | 84829900. |
| QCO Coverage | Proposed to be covered under the draft Bearing Components and Accessories (Quality Control) Order, 2025. |
| Notification & Amendments | Draft QCO issued by Department for Promotion of Industry & Internal Trade (DPIIT), Ministry of Commerce and Industry, 2025. |
| Final Enforcement Date | Not notified yet. The QCO is currently in draft stage and under process. |
| Objective & Scope | To ensure dimensional accuracy, interchangeability, reliability, fitment compatibility, and quality consistency of adapter sleeve assemblies and withdrawal sleeves used in rolling bearing applications. |
| Products Covered | Adapter sleeve assemblies and withdrawal sleeves used with rolling bearings in industrial machinery, automotive systems, heavy engineering equipment, transmission systems, and mechanical applications. |
| Exemptions | Products manufactured domestically solely for export are exempt. Up to 200 numbers imported annually for research and development purposes are exempt subject to prescribed conditions. |
| Industries Impacted | Bearing Manufacturing, Industrial Machinery, Automotive Components, Heavy Engineering, Power Transmission Equipment, Railways, Mining Equipment, and Precision Engineering Industries. |
| Mandatory Compliance | Products shall conform to IS 16605 (Part 1):2018 / ISO 2982-1:2013 and bear the Standard Mark (ISI Mark) under a valid BIS license. Compliance will be required after enforcement of the final QCO notification. |
| Next Steps for Stakeholders | Monitor final gazette notification. Prepare for BIS certification under Scheme-I. Conduct product testing as per applicable Indian Standard. Align manufacturing and quality systems with BIS requirements. |
| Legal Framework & Penalties | Proposed under Sections 16, 17, and 25(3) of the BIS Act, 2016. BIS will act as the certifying and enforcement authority after notification. |
| Penalties for Non-Compliance | Upon enforcement, violations may attract imprisonment up to 2 years or fine of not less than ₹2 lakh (extendable up to 10× the value of goods) or both, along with additional penalties for continuing offences under the BIS Act, 2016. |
| Supersession & Amendment Clause | The latest version of Indian Standards and amendments notified by BIS from time to time shall apply automatically. |
| Conclusion | Manufacturers and importers of adapter sleeve assemblies and withdrawal sleeves should proactively prepare for BIS compliance as the draft Bearing Components and Accessories (Quality Control) Order, 2025 is currently under process and may become mandatory upon final notification. |
| References/Annexures | Draft Bearing Components and Accessories (Quality Control) Order, 2025; BIS Act, 2016; IS 16605 (Part 1):2018 / ISO 2982-1:2013. |
Notification
The product Rolling Bearings Accessories Dimensions for Adapter Sleeve Assemblies and Withdrawal Sleeves, classified under ITC (HS) Code 84829900, has been proposed for mandatory quality control under the draft Bearing Components and Accessories (Quality Control) Order, 2025 issued by the Department for Promotion of Industry & Internal Trade (DPIIT), Ministry of Commerce and Industry. The draft order proposes mandatory compliance with IS 16605 (Part 1):2018 / ISO 2982-1:2013 for adapter sleeve assemblies and withdrawal sleeves used in rolling bearing applications.
Enforcement Timeline
Notification Status: Draft QCO under process.
General Implementation: Six months from the date of publication of the final order.
Small Enterprises: Nine months from the date of publication of the final order.
Micro Enterprises: Twelve months from the date of publication of the final order.
Enforcement: Will become applicable after publication of the final QCO notification in the Official Gazette.
Overview
The proposed regulation aims to ensure dimensional precision, interchangeability, operational reliability, and quality consistency of adapter sleeve assemblies and withdrawal sleeves used in rolling bearing systems across industrial and engineering applications. The draft QCO seeks to prevent circulation of substandard bearing accessories in the domestic market and improve machinery safety and performance.
Objective & Scope
The draft order intends to establish mandatory quality benchmarks for adapter sleeve assemblies and withdrawal sleeves by enforcing compliance with IS 16605 (Part 1):2018 / ISO 2982-1:2013. The objective is to improve compatibility, dimensional accuracy, secure mounting performance, and operational reliability in rolling bearing applications.
Products Covered
The proposed QCO applies specifically to:
- Adapter sleeve assemblies
- Withdrawal sleeves
- Bearing mounting accessories
- Bearing fitment components
- Mechanical shaft mounting accessories
- Rolling bearing support accessories
used in industrial and mechanical applications.
Exemptions Provided
The draft QCO provides exemptions for:
- Products manufactured domestically solely for export.
- Up to 200 numbers of imported goods annually for research and development purposes subject to prescribed record-keeping and disposal conditions.
Industries Impacted
- Bearing Manufacturing
- Industrial Machinery
- Automotive Components
- Heavy Engineering
- Power Transmission Equipment
- Railways
- Mining Equipment
- Precision Engineering Industries
Mandatory Compliance Requirements
- Products must conform to IS 16605 (Part 1):2018 / ISO 2982-1:2013.
- Products will be required to bear the Standard Mark (ISI Mark) under a valid BIS license after enforcement.
- Manufacturers and importers will need BIS certification under Scheme-I of BIS Conformity Assessment Regulations, 2018.
- Quality documentation and testing records should be maintained for inspection and audit purposes.
Legal Provisions , Enforcement & Penalties
The draft order has been proposed under Sections 16, 17, and 25(3) of the BIS Act, 2016. BIS is proposed to act as the certifying and enforcement authority.
Upon final enforcement, non-compliance may attract penalties under Section 29 of the BIS Act, 2016, including:
- Imprisonment up to 2 years, or
- Fine of not less than ₹2 lakh (extendable up to 10× the value of goods), or both.
For continuing offences, additional fines may also apply under the BIS Act provisions.
Conclusion
Although the Bearing Components and Accessories (Quality Control) Order, 2025 is presently in draft stage and not yet mandatory, manufacturers and importers of adapter sleeve assemblies and withdrawal sleeves should begin compliance preparation, product testing, and BIS certification planning to ensure timely market readiness once the final QCO is officially notified.