Rolling Bearings – Balls: Part 1 Steel Balls.
Steel Balls for Rolling Bearings
Strategic Recommendations for Steel Balls for Rolling Bearings IS 2898 (Part 1):2019 / ISO 3290-1:2014
Start BIS Certification Preparation Immediately
Prepare for BIS certification under IS 2898 (Part 1):2019 / ISO 3290-1:2014 in advance, as the draft Bearing Components and Accessories (Quality Control) Order, 2025 is currently under process and may become mandatory upon final notification.
Engage ERA Compliance Experts
ERA’s team can guide with applications, testing, ISI marking, and audit readiness for seamless compliance.
Reach Out for Support
📧 cs@eraglobal.co.in | 📞 +91 9599296331 | 💬 WhatsApp – Assistance with certification, inspections, and compliance queries.
Track QCO Updates & Subscribe ERA Newsletter
Subscribe to the ERA Newsletter for updates on Government Gazette notifications, amendments to the draft Bearing Components and Accessories QCO, 2025, and BIS compliance deadlines.
Ensure ISI Marking & Test Certification
Upon enforcement of the final QCO, all consignments must carry the ISI mark and a valid BIS Test Certificate before sale or use in India. Non-conforming material must be handled as per BIS Act provisions.
| Section | Details |
|---|---|
| Product Name | Steel Balls for Rolling Bearings. |
| Applicable Indian Standard (IS) No. | IS 2898 (Part 1):2019 / ISO 3290-1:2014. |
| Title of IS | Rolling Bearings – Balls: Part 1 Steel Balls. |
| ITC (HS) Codes | 84829100. |
| QCO Coverage | Proposed to be covered under the draft Bearing Components and Accessories (Quality Control) Order, 2025. |
| Notification & Amendments | Draft QCO issued by Department for Promotion of Industry & Internal Trade (DPIIT), Ministry of Commerce and Industry, 2025. |
| Final Enforcement Date | Not notified yet. The QCO is currently in draft stage and under process. |
| Objective & Scope | To ensure dimensional accuracy, hardness, surface finish, durability, and quality consistency of steel balls used in rolling bearings for industrial and automotive applications. |
| Products Covered | Steel balls used in rolling bearings for automotive, machinery, industrial equipment, electric motors, and engineering applications. |
| Exemptions | Products manufactured domestically solely for export are exempt. Up to 200 numbers imported annually for research and development purposes are exempt subject to prescribed conditions. |
| Industries Impacted | Bearing Manufacturing, Automotive Components, Industrial Machinery, Electric Motors, Heavy Engineering, Railways, Aerospace, and Industrial Equipment Manufacturing. |
| Mandatory Compliance | Products shall conform to IS 2898 (Part 1):2019 / ISO 3290-1:2014 and bear the Standard Mark (ISI Mark) under a valid BIS license. Compliance will be required after enforcement of the final QCO notification. |
| Next Steps for Stakeholders | Monitor final gazette notification. Prepare for BIS certification under Scheme-I. Conduct product testing as per applicable Indian Standard. Align manufacturing and quality systems with BIS requirements. |
| Legal Framework & Penalties | Proposed under Sections 16, 17, and 25(3) of the BIS Act, 2016. BIS will act as the certifying and enforcement authority after notification. |
| Penalties for Non-Compliance | Upon enforcement, violations may attract imprisonment up to 2 years or fine not less than ₹2 lakh (extendable up to 10× the value of goods) or both, along with additional penalties for continuing offences under the BIS Act, 2016. |
| Supersession & Amendment Clause | The latest version of Indian Standards and amendments notified by BIS from time to time shall apply automatically. |
| Conclusion | Manufacturers and importers of steel balls for rolling bearings should proactively prepare for BIS compliance as the draft Bearing Components and Accessories QCO, 2025 is currently under process and may become mandatory upon final notification. |
| References/Annexures | Draft Bearing Components and Accessories (Quality Control) Order, 2025; BIS Act, 2016; IS 2898 (Part 1):2019 / ISO 3290-1:2014. |
Notification
The product Steel Balls for Rolling Bearings, classified under ITC (HS) Code 84829100, has been proposed for mandatory quality control under the draft Bearing Components and Accessories (Quality Control) Order, 2025 issued by the Department for Promotion of Industry & Internal Trade (DPIIT), Ministry of Commerce and Industry. The draft order proposes mandatory compliance with IS 2898 (Part 1):2019 / ISO 3290-1:2014 for steel balls used in rolling bearings.
Enforcement Timeline
Notification Status: Draft QCO under process.
Effective Date: Not notified yet.
Enforcement: Will become applicable after publication of the final QCO notification in the Official Gazette
Overview
The proposed regulation aims to ensure quality, precision, durability, and performance consistency of steel balls used in rolling bearings across automotive, industrial, and engineering applications. The draft QCO seeks to prevent the circulation of substandard bearing components in the domestic market and strengthen product reliability and operational safety.
Objective & Scope
The draft order intends to establish mandatory quality benchmarks for steel balls used in rolling bearings by enforcing compliance with IS 2898 (Part 1):2019 / ISO 3290-1:2014. The objective is to improve dimensional accuracy, hardness, surface finish, fatigue resistance, and operational reliability in critical industrial applications.
Products Covered
The proposed QCO applies specifically to steel balls used in rolling bearings for:
- Automotive applications
- Industrial machinery
- Electric motors
- Pumps and compressors
- Heavy engineering equipment
- Railway and aerospace applications
Exemptions Provided
The draft QCO provides exemptions for:
- Products manufactured domestically solely for export.
- Up to 200 numbers of imported goods annually for research and development purposes subject to prescribed record-keeping and disposal conditions.
Industries Impacted
- Bearing Manufacturing
- Automotive Components
- Industrial Machinery
- Electric Motors
- Heavy Engineering
- Railways
- Aerospace
- Industrial Equipment Manufacturing
Mandatory Compliance Requirements
- Products must conform to IS 2898 (Part 1):2019 / ISO 3290-1:2014.
- Products will be required to bear the Standard Mark (ISI Mark) under a valid BIS license after enforcement.
- Manufacturers and importers will need BIS certification under Scheme-I of BIS Conformity Assessment Regulations, 2018.
- Quality documentation and testing records should be maintained for inspection and audit purposes.
Legal Provisions , Enforcement & Penalties
The draft order has been proposed under Sections 16, 17, and 25(3) of the BIS Act, 2016. BIS is proposed to act as the certifying and enforcement authority.
Upon final enforcement, non-compliance may attract penalties under Section 29 of the BIS Act, 2016, including:
- Imprisonment up to 2 years, or
- Fine of not less than ₹2 lakh (extendable up to 10× the value of goods), or both.
For continuing offences, additional fines may also apply under the BIS Act provisions.
Conclusion
Although the Bearing Components and Accessories (Quality Control) Order, 2025 is presently in draft stage and not yet mandatory, manufacturers and importers of steel balls for rolling bearings should begin compliance preparation, product testing, and BIS certification planning to ensure timely market readiness once the final QCO is officially notified.
Ready to start your certification journey?
Let us help you navigate regulatory challenges and achieve certification with ease. Leave us your details, and we’ll get back to you—or request a free consultation today.