Aluminium and Aluminium Alloy Products
Wrought Aluminium and Aluminium Alloy Wire for General Engineering Purposes
Strategic Recommendations for Wrought Aluminium and Aluminium Alloy Wire for General Engineering Purposes — IS 739 : 1992
- Start BIS Certification in Advance of Deadlines
Manufacturers and importers should initiate BIS certification under Scheme-I well ahead of the phased enforcement dates starting 1 December 2026, as testing, inspection, and approval timelines require sufficient planning. - Engage ERA Compliance Experts
ERA’s compliance team provides end-to-end support for BIS certification, including application filing, coordination with BIS-recognised laboratories, factory audit readiness, corrective action support, and ISI marking approval to ensure smooth and timely compliance. - Reach Out for Support
For product eligibility checks, documentation guidance, and certification timelines, stakeholders may directly connect with ERA’s compliance team.
📧 cs@eraglobal.co.in | 📞 +91 9599296331 | 💬 WhatsApp Support Available - Track Gazette Notifications and Amendments
Stay updated on future Government notifications, BIS amendments, and enforcement changes by regularly tracking Gazette publications and subscribing to the ERA Newsletter for timely regulatory alerts and compliance updates. - Ensure ISI Marking and Model-wise Control
Only BIS-certified aluminium wires conforming to IS 739:1992 and bearing the ISI Mark should be manufactured, imported, or supplied in India. Non-certified or transitional stock must be strictly segregated and managed as per notified provisions.
| Section | Details |
|---|---|
| Product Name | Wrought Aluminium and Aluminium Alloy Wire for General Engineering Purposes |
| Applicable Indian Standard (IS) No. | IS 739:1992 |
| Title of Indian Standard | Wrought Aluminium and Aluminium Alloy Wire for General Engineering Purposes |
| QCO Coverage | Covered under Aluminium and Aluminium Alloy Products (Quality Control) regulatory framework |
| Latest Governing Notification | Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026 – S.O. 1319(E), dated 11 March 2026, issued by the Department for Promotion of Industry and Internal Trade (DPIIT), Ministry of Commerce and Industry |
| Supersession History | Supersedes the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2025, except for actions taken prior to such supersession |
| Enforcement Date (Category-wise) |
General Enterprises: 1 December 2026, Small Enterprises: 1 March 2027, Micro Enterprises: 1 June 2027. |
| Objective & Scope | To ensure that wrought aluminium and aluminium alloy wires used for general engineering applications meet specified requirements for composition, mechanical properties, dimensional accuracy, and performance, ensuring safety, reliability, and uniform quality across industrial applications. |
| Products Covered | Wrought aluminium and aluminium alloy wires used in general engineering applications, including electrical, mechanical, and structural uses, conforming to IS 739:1992. |
| Exemptions | Goods manufactured exclusively for export and imports up to 200 kilograms per year for research and development purposes, subject to conditions specified in the Order. |
| Industries Impacted | Aluminium wire manufacturers, engineering component manufacturers, electrical equipment manufacturers, OEM suppliers, infrastructure developers, importers, distributors, and industrial users. |
| Mandatory Compliance | Products must conform to IS 739:1992 and bear the Standard Mark (ISI Mark) under a valid BIS licence (Scheme-I) before manufacture, import, sale, or distribution in India. |
| Certification, Enforcement & Legal Framework | Certification and enforcement are carried out by the Bureau of Indian Standards (BIS) under the Bureau of Indian Standards Act, 2016 and BIS (Conformity Assessment) Regulations, 2018. |
| Penalties for Non-Compliance | Non-compliance is punishable under the BIS Act, 2016, including imprisonment up to two years, fines starting from ₹2 lakh and extendable up to ten times the value of goods, or both, along with additional penalties for continuing offences. |
| Supersession & Amendment Clause | The latest version of IS 739, including amendments notified by BIS from time to time, applies automatically from the date of such notification. |
| Next Steps for Stakeholders | Identify applicable wire products, ensure conformity with IS 739:1992, apply for BIS certification, conduct testing in BIS-recognised laboratories, complete factory inspection and documentation, obtain BIS licence, affix ISI Mark, ensure only certified products are manufactured, imported, or supplied before enforcement dates. |
| Conclusion | BIS certification for Wrought Aluminium and Aluminium Alloy Wire for General Engineering Purposes as per IS 739:1992 is mandatory from 1 December 2026 (general category), with phased timelines for MSMEs. Early compliance ensures uninterrupted market access and avoids regulatory penalties. |
Ready to start your certification journey?
Let us help you navigate regulatory challenges and achieve certification with ease. Leave us your details, and we’ll get back to you—or request a free consultation today.
Get in touch with us today
Notification
Wrought Aluminium and Aluminium Alloy Wire for General Engineering Purposes has been brought under mandatory quality control through the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026, notified vide S.O. 1319(E) dated 11 March 2026 by the Department for Promotion of Industry and Internal Trade (DPIIT), Ministry of Commerce and Industry. The Order supersedes the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2025, except in respect of actions taken or omitted before such supersession. The regulation mandates conformity to IS 739:1992 – Wrought Aluminium and Aluminium Alloy Wire for General Engineering Purposes.
Enforcement Timeline
As per the implementation schedule notified in S.O. 1319(E) dated 11 March 2026, mandatory compliance applies from 1 December 2026 for general enterprises, 1 March 2027 for small enterprises, and 1 June 2027 for micro enterprises.
Overview
The regulatory framework requires wrought aluminium and aluminium alloy wires used in general engineering applications to comply with defined technical and quality requirements. IS 739:1992 specifies essential parameters such as material composition, mechanical properties, dimensional tolerances, and performance characteristics to ensure suitability across industrial and engineering applications. The regulation aims to ensure consistent product quality, reliability, and safety while eliminating substandard materials from the market.
Objective & Scope
The primary objective is to ensure that aluminium alloy wires used in engineering and industrial applications meet standardized quality and performance benchmarks. The scope covers manufacture, import, sale, and distribution of wrought aluminium and aluminium alloy wires in India. Products manufactured exclusively for export are excluded from domestic compliance requirements, subject to notified conditions.
Products Covered
The regulation applies to wrought aluminium and aluminium alloy wires used for general engineering purposes, including applications in electrical systems, mechanical components, structural uses, and industrial manufacturing, as specified under IS 739:1992.
Exemptions Provided
Limited exemptions are provided for goods manufactured exclusively for export and for imports up to 200 kilograms per year for research and development purposes, subject to conditions that such products are not sold commercially and proper records are maintained.
Industries Impacted
The regulation impacts aluminium wire manufacturers, engineering product manufacturers, electrical equipment manufacturers, OEM suppliers, infrastructure developers, importers, distributors, and industrial users relying on aluminium wires.
Mandatory Compliance Requirements
Manufacturers and importers are required to obtain BIS certification under Scheme-I, ensure testing through BIS-recognised laboratories, comply with factory inspection and quality control requirements, and affix the ISI Mark on compliant products before they are manufactured, imported, or sold in the Indian market.
Next Steps for Stakeholders
Stakeholders should identify all applicable product variants, initiate the BIS certification process, conduct required testing, align manufacturing and quality systems with IS 739:1992, and complete certification well before the applicable enforcement deadlines to ensure uninterrupted business operations.
Legal Provisions & Penalties
Certification and enforcement are administered by the Bureau of Indian Standards (BIS) under the Bureau of Indian Standards Act, 2016. Non-compliance may lead to penalties including imprisonment up to two years, fines starting from ₹2 lakh and extending up to ten times the value of goods, or both, along with additional penalties for continuing violations.
Conclusion
Compliance with IS 739:1992 and BIS certification is mandatory for wrought aluminium and aluminium alloy wire used in general engineering purposes from the notified enforcement dates. Timely compliance ensures regulatory adherence, uninterrupted market access, and enhanced product reliability in industrial applications.
Ready to start your certification journey?
Let us help you navigate regulatory challenges and achieve certification with ease. Leave us your details, and we’ll get back to you—or request a free consultation today.