Steel and Iron Products
Carbon Steel Wire for the Manufacture of Wood Screws
Strategic Recommendations for Carbon Steel Wire for Wood Screws (IS 1812:1982)
- Begin BIS Certification Immediately
Compliance with IS 1812:1982 is mandatory with immediate effect from 30th August 2024. Manufacturers and importers should initiate BIS applications without delay. - Consult ERA Compliance Experts
Partner with ERA’s compliance team for support with BIS certification, testing, ISI marking, and audit preparedness. - Reach Out for Support
📧 cs@eraglobal.co.in | 📞 +91 9599296331 | 💬 WhatsApp – Guidance for QCO filings, test certification, and inspection readiness. - Track QCO Updates & Subscribe ERA Newsletter
Subscribe to ERA Newsletter for real-time updates on government notifications, BIS amendments, and compliance deadlines. - Ensure Marking & Documentation
Every consignment must carry the ISI Mark with licence number and BIS Test Certificate. Non-conforming material must be scrapped as per BIS Act provisions.
| Section | Details |
|---|---|
| Product Name | Carbon Steel Wire for the Manufacture of Wood Screws |
| Applicable Indian Standard (IS) No. | IS 1812:1982 |
| Title of Indian Standard | Specification for Carbon Steel Wire for the Manufacture of Wood Screws |
| ITC (HS) Code | 72171010, 72171020, 72171030, 72172010, 72172020, 72172030, 72179019, 72179091, 72179099, 72299031, 72299033, 72299059, 72299090 |
| Quality Control Order | Covered under the Steel and Steel Products (Quality Control) Order, 2024 |
| Notification & Amendments | S.O. 3716(E), dated 29th August 2024; supersedes S.O. 574(E), dated 5th February 2024 |
| Final Enforcement Date | With immediate effect (30th August 2024) |
| Objective & Scope | To ensure that carbon steel wire used for wood screws meets BIS-certified standards, guaranteeing strength, consistency, and safety in construction and woodworking applications. |
| Products Covered | All carbon steel wires intended for manufacturing wood screws conforming to IS 1812:1982. |
| Exemptions | Steel manufactured exclusively for export conforming to foreign buyer specifications. |
| Industries Impacted | - Screw & Fastener Manufacturing- Woodworking & Furniture- Construction & Carpentry- Hardware & Tooling- Engineering & Fabrication |
| Mandatory Compliance | - Products must carry ISI Standard Mark under a valid BIS licence.- Each consignment must be accompanied by a BIS Test Certificate.- Non-conforming material must be scrapped. |
| Next Steps for Stakeholders | - Apply for BIS certification under Scheme–I of BIS (Conformity Assessment) Regulations, 2018.- Align production and testing with IS 1812:1982.- Ensure ISI marking and BIS Test Certificate with each consignment.- Export units should verify exemption applicability. |
| Legal Framework Provision & Enforcement | Sections 16, 17, and 25(3) of the BIS Act, 2016. BIS is the certifying and enforcement authority. |
| Penalties | Imprisonment up to 2 years, or fine of not less than ₹2 lakh (extendable up to 10× value of goods), or both. Continuing offences may attract ₹5,000 per day. |
| Supersession & Amendment Clause | Supersedes earlier QCO notified via S.O. 574(E), dated 5th February 2024. Any future BIS amendments to IS 1812:1982 will automatically apply. |
| Conclusion | Compliance with IS 1812:1982 is mandatory. All carbon steel wire for wood screws must carry the ISI Mark, be accompanied by a BIS Test Certificate, and meet BIS standards to ensure quality, safety, and reliability in manufacturing and construction. |
| References/Annexures | Gazette Notification S.O. 3716(E), dated 29th August 2024; Steel Products (Quality Control) Order, 2024; BIS Act, 2016 |
Ready to start your certification journey?
Let us help you navigate regulatory challenges and achieve certification with ease. Leave us your details, and we’ll get back to you—or request a free consultation today.
Get in touch with us today
Notification
The product Carbon Steel Wire for the Manufacture of Wood Screws, classified under ITC (HS) Codes 72171010, 72171020, 72171030, 72172010, 72172020, 72172030, 72179019, 72179091, 72179099, 72299031, 72299033, 72299059, 72299090, has been brought under mandatory quality certification through the Steel and Steel Products (Quality Control) Order, 2024. It was notified via S.O. 3716(E), dated 29th August 2024, superseding S.O. 574(E), dated 5th February 2024.
Enforcement Timeline
- Notification Date: 29th August 2024
- Effective Date: 30th August 2024
- Enforcement: With immediate effect
Overview
The regulation mandates that all carbon steel wire for wood screws conforms to IS 1812:1982, ensuring consistent tensile strength, ductility, and dimensional accuracy. This protects screw manufacturers, woodworking industries, and end-users from risks caused by substandard steel wire.
Objective & Scope
The QCO aims to eliminate substandard steel wire from the market and enforce BIS-certified quality standards across domestic production and imports, promoting safety, durability, and operational efficiency.
Products Covered
All carbon steel wire intended for the manufacture of wood screws, conforming to IS 1812:1982.
Exemptions Provided
Steel wire manufactured exclusively for export and conforming to foreign buyer specifications are exempt.
Industries Impacted
- Screw & Fastener Manufacturing
- Woodworking & Furniture
- Construction & Carpentry
- Hardware & Tooling
- Engineering & Fabrication
Mandatory Compliance Requirements
- Products must bear the ISI Mark under a valid BIS licence.
- Each consignment must include a BIS Test Certificate.
- Non-conforming material must be disposed of as scrap.
Next Steps for Stakeholders
- Manufacturers & Importers: Apply immediately for BIS certification under Scheme-I .
- Production & Testing: Align processes and in-house testing with IS 1812:1982 requirements.
- Supply Chain Compliance: Ensure every consignment carries ISI marking and BIS Test Certificate.
- Export Units: Confirm exemption applicability if producing exclusively for export.
- Documentation & Audit: Maintain complete records of production, testing, and certification for BIS inspections.
Legal Provisions, Enforcement & Penalties
This order is issued under Sections 16, 17, and 25(3) of the BIS Act, 2016. BIS is the certifying and enforcement authority.
Violation of the Order attracts penalties under Section 29 of the BIS Act, 2016, which include:
- Imprisonment up to 2 years, or
- Fine of not less than ₹2 lakh (extendable up to 10 times the value of goods), or both.
- For continuing offences, an additional fine of up to ₹5,000 per day may be imposed.
Conclusion
Effective immediately, BIS certification is mandatory for carbon steel wire for wood screws under IS 1812:1982. All consignments must carry the ISI Mark and a valid BIS Test Certificate. Compliance ensures product quality, industry safety, and market reliability. Exporters must verify exemption conditions before shipment.
Ready to start your certification journey?
Let us help you navigate regulatory challenges and achieve certification with ease. Leave us your details, and we’ll get back to you—or request a free consultation today.