Cylinder, Valves and Regulator
Valve fittings for gas cylinder valves for use with breathing apparatus
Strategic Recommendations for Valve fittings for gas cylinder valves for use with breathing apparatus IS 7302
- Begin BIS Certification Immediately
Though not under BIS QCO, initiate PESO type/design approval for valve fittings under IS 7302 to ensure compliance with GCR 2016. - Consult Compliance Professionals (ERA)
Engage ERA for technical assistance with PESO submissions, valve fitting test protocols, and design documentation. - Reach Out for Support
📧 cs@eraglobal.co.in | 📞 +91 95992 96331 | 💬 WhatsApp
For help with PESO licensing, test planning, and regulatory documentation. - Track QCO Amendments & Exemptions
Subscribe to ERA Newsletter for Monitor PESO circulars and updates to GCR 2016, including the 2022 amendments. Verify if any exemptions under Rule 44 can apply to specific user scenarios. - Ensure Marking & Documentation
Ensure valve fittings are permanently marked with required identifiers (manufacturer ID, approval marks, test codes). Maintain QC records, test reports, and traceability to support inspections.
| Section | Details |
|---|---|
| Product Name | Valve fittings for gas cylinder valves for use with breathing apparatus |
| Applicable Indian Standard (IS) No. | IS 7302 |
| Title of Indian Standard | Valve Fittings for Gas Cylinder Valves for Use with Breathing Apparatus |
| Quality Control Order | Not covered under a BIS QCO; regulated under Gas Cylinders Rules, 2016 (GSR 1081(E)), framed under the Explosives Act, 1884. |
| Notification & Amendments | Notified via GSR 1081(E), 22 Nov 2016 (superseding 2004 Rules); draft via GSR 779(E), 13 Oct 2015; further updated by Gas Cylinders (Amendment) Rules, 2022. |
| Final Enforcement Date | 22 November 2016 (date Gas Cylinders Rules, 2016 came into force). |
| Objective & Scope | To regulate and standardise the safety, interchangeability, and performance of valve fittings for breathing apparatus cylinder valves used in life-saving and emergency applications. |
| Products Covered | Valve fittings designed for gas cylinder valves used with breathing apparatus (e.g., SCBA cylinders, medical breathing sets, firefighting applications). |
| Exemptions | No product-specific exemption; general Rule 44 possession exemptions under GCR 2016 may apply in limited cases. |
| Industries Impacted | Manufacturers of SCBA sets, firefighting equipment suppliers, medical breathing apparatus producers, industrial safety suppliers, gas cylinder/valve manufacturers, PESO-licensed entities. |
| Mandatory Compliance | Conformance to IS 7302; PESO type/design approval required; valve fittings must meet dimensional, mechanical, and safety test requirements; stamping/marking per Rule 6; compliance with GCR 2016 valve requirements (Rule 4). |
| Next Steps for Stakeholders | Obtain PESO approval for design/type; test valve fittings as per IS 7302; implement traceability and stamping; ensure linkage with approved cylinders for SCBA/breathing apparatus use. |
| Legal Framework Provision & Enforcement | Enforced under Explosives Act, 1884 and Gas Cylinders Rules, 2016; PESO is the competent authority for inspections, approvals, and enforcement. |
| Penalties for Non-Compliance | Non-compliant valves/fittings may be seized; PESO may suspend/cancel approvals; fines and imprisonment possible under the Act. |
| Conclusion | IS 7302 valve fittings are safety-critical components regulated under GCR 2016. PESO approval, IS conformity, and lifecycle testing/marking are mandatory for breathing apparatus use. |
| References / Annexures | GSR 1081(E) – Gas Cylinders Rules, 2016; GSR 779(E) – Draft Rules; Gas Cylinders (Amendment) Rules, 2022; IS 7302. |
Ready to start your certification journey?
Let us help you navigate regulatory challenges and achieve certification with ease. Leave us your details, and we’ll get back to you—or request a free consultation today.
Get in touch with us today
Notification
 Valve fittings for gas cylinder valves used with breathing apparatus are regulated under the Gas Cylinders Rules, 2016, notified via GSR 1081(E) dated 22 November 2016. These Rules replaced the 2004 framework, following the draft publication GSR 779(E) dated 13 October 2015, and were later amended through the Gas Cylinders (Amendment) Rules, 2022.
Enforcement Timeline
 The Gas Cylinders Rules, 2016 became effective on 22 November 2016, making PESO approval and IS conformity mandatory from that date onward.
Overview
 IS 7302 specifies the requirements for valve fittings for cylinder valves intended for breathing apparatus, such as SCBA (self-contained breathing apparatus), firefighting gear, and medical breathing equipment. The standard ensures interchangeability, leak-tightness, and mechanical reliability in high-safety applications.
Objective & Scope
The objective is to guarantee safety, reliability, and standardisation of valve fittings used in breathing apparatus cylinders, thereby supporting life-critical applications in firefighting, medical, and industrial safety sectors.
Products Covered
 Applies to valve fittings used with breathing apparatus cylinders (e.g., SCBA sets, emergency rescue cylinders, firefighting and medical breathing gear).
Exemptions Provided
 There are no product-specific exemptions. Only limited Rule 44 exemptions under GCR 2016 may apply for small quantities in non-commercial use.
Industries Impacted
 This requirement affects manufacturers of breathing apparatus, SCBA equipment suppliers, medical oxygen suppliers, firefighting gear producers, cylinder and valve manufacturers, and PESO-licensed testing/repair facilities.
Mandatory Compliance Requirements
 Manufacturers must comply with IS 7302, (Scheme-I ) obtain PESO design/type approval, and ensure valve fittings pass dimensional, leakage, and performance tests. Markings per Rule 6 are mandatory, and fittings must be paired with compliant cylinders under Rule 4.
Next Steps for Stakeholders
 Stakeholders should apply for PESO type approval, prepare detailed drawings and QC/test plans, conduct conformity testing, and implement stamping and documentation. Regular liaison with PESO ensures continued compliance.
Legal Provisions, Enforcement & Penalties
The Gas Cylinders Rules, 2016 are enforced under the Explosives Act, 1884, with PESO as the licensing and enforcement authority. Penalties for violations include seizure of non-conforming valves, cancellation of licences, monetary fines, and imprisonment.
Conclusion
 IS 7302 valve fittings for breathing apparatus cylinders are tightly regulated under GCR 2016 due to their life-saving applications. Manufacturers and suppliers must ensure PESO approval, IS conformity, and strict quality controls for continued compliance.
References / Annexures
- GSR 1081(E) – Gas Cylinders Rules, 2016
- GSR 779(E) – Draft Rules
- Gas Cylinders (Amendment) Rules, 2022
- IS 7302
Ready to start your certification journey?
Let us help you navigate regulatory challenges and achieve certification with ease. Leave us your details, and we’ll get back to you—or request a free consultation today.