Safety of Household, Commercial and Similar Electrical Appliances
Slicing Machines
Strategic Recommendations for Slicing Machines — IS 302 (Part 1): 2024
Start BIS Certification in Advance of Deadlines
Manufacturers and importers should initiate BIS certification under Scheme-I well before the phased enforcement dates (1 October 2026 / 1 January 2027 / 1 April 2027) to accommodate testing, inspection, and approval timelines.Engage ERA Compliance, Experts
ERA’s compliance team provides end-to-end support for BIS certification, including application filing, coordination with BIS-recognised laboratories, factory audit readiness, corrective action support, and ISI marking approval to ensure smooth and timely compliance.Reach Out for Support
For product eligibility checks, documentation guidance, and certification timelines, stakeholders may directly connect with ERA’s compliance team.
📧 cs@eraglobal.co.in | 📞 +91 9599296331 | 💬 WhatsApp Support AvailableTrack Gazette Notifications and Amendments
Stay updated on future Government notifications, BIS amendments, and enforcement changes by regularly tracking Gazette publications and subscribing to the ERA Newsletter for timely regulatory alerts and compliance updates.Ensure ISI Marking and Product Compliance Control
Only BIS-certified slicing machines conforming to IS 302 (Part 1): 2024 and bearing the ISI Mark should be manufactured, imported, or sold in India. Non-certified or transitional stock must be strictly segregated and managed as per the notified provisions.
| Section | Details |
|---|---|
| Product Name | Slicing Machines |
| Applicable Indian Standard (IS) No. | IS 302 (Part 1): 2024 / IEC 60335-1: 2020. |
| Title of Indian Standard | Household and Similar Electrical Appliances — Safety — Part 1: General Requirements. |
| Notification & Amendments | Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026 vide S.O. 1739(E) dated 6 April 2026, issued by DPIIT, Ministry of Commerce and Industry; supersedes QCO 2025 except for actions taken prior to such supersession. |
| Enforcement Date (Category-wise) | General Enterprises: 1 October 2026; Small Enterprises: 1 January 2027; Micro Enterprises: 1 April 2027. |
| Objective & Scope | To ensure the safety of electrical slicing machines by prescribing requirements related to electrical insulation, mechanical integrity, blade safety, overheating protection, and safe operation in household and commercial environments within prescribed voltage limits. |
| Products Covered | Electrical slicing machines used for cutting or slicing food or similar materials in household, commercial, and institutional applications. |
| Exemptions | Goods manufactured for export; up to 200 units/year for R&D (non-commercial use); declared pre-implementation stock allowed for sale up to 6 months with declaration; products covered under other QCOs excluded. |
| Special Coverage | Includes appliances operating up to 250V (single-phase) and 480V (others), including DC supplied and battery-operated slicing machines. |
| Industries Impacted | Kitchen appliance manufacturers, food processing equipment manufacturers, OEM suppliers, importers, distributors, retailers, hospitality equipment suppliers, and e-commerce platforms. |
| Mandatory Requirement | Products must conform to IS 302 (Part 1): 2024 and bear the BIS Standard Mark (ISI Mark) under a valid BIS licence before manufacture, import, sale, or distribution. |
| Next Steps for Stakeholders | Identify applicable products; initiate BIS certification; conduct testing through BIS-recognised labs; complete factory inspection; obtain BIS licence; ensure ISI marking before enforcement deadlines. |
| Certification, Enforcement Authority & Legal Provision | Bureau of Indian Standards (BIS) under BIS Act, 2016; certification under Scheme-I of BIS (Conformity Assessment) Regulations, 2018. |
| Penalty for Non-Compliance | Imprisonment up to 2 years under BIS Act, 2016, Fine starting from ₹2 lakh and up to ten times the value of goods, Additional penalties for continuing violations and possible seizure of non-compliant products. |
| Amendments & Latest Applicability | Latest QCO 2026 and all amendments to IS standards notified by BIS from time to time shall apply automatically. |
| Conclusion | BIS certification is mandatory for slicing machines from the notified dates, and early compliance is essential to ensure uninterrupted market access and regulatory adherence. |
| References/Annexures | Gazette Notification S.O. 1739(E) dated 6 April 2026; BIS Act, 2016; BIS Regulations, 2018; IS 302 (Part 1): 2024. |
Ready to start your certification journey?
Let us help you navigate regulatory challenges and achieve certification with ease. Leave us your details, and we’ll get back to you—or request a free consultation today.
Get in touch with us today
Notification
Slicing Machines have been brought under mandatory quality control through the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026, notified vide S.O. 1739(E) dated 6 April 2026 by the Department for Promotion of Industry and Internal Trade (DPIIT), Ministry of Commerce and Industry. This Order supersedes the earlier QCO of 2025, except for actions taken or omitted before such supersession, and mandates compliance with IS 302 (Part 1): 2024, aligned with international safety standard IEC 60335-1.
Overview
The regulatory framework establishes uniform safety requirements for slicing machines used across household, commercial, and institutional settings. IS 302 (Part 1): 2024 lays down critical safety parameters such as electrical insulation, protection against electric shock, mechanical strength, thermal resistance, and operational safety. Given the presence of sharp cutting components, the regulation is particularly significant in ensuring mechanical safety and preventing user injury during operation.
Objective & Scope
The primary objective is to ensure that slicing machines operate safely without posing electrical, thermal, or mechanical hazards to users. The scope includes appliances operating within specified voltage limits, including AC, DC, and battery-operated variants. The regulation applies to the manufacture, import, sale, and distribution of such appliances within India, ensuring that only compliant and safe products are available in the market.
Products Covered
The Order covers all types of electrical slicing machines designed for cutting or slicing food or similar materials, whether used in domestic kitchens, commercial establishments, or industrial food processing environments, provided they fall within the defined scope of IS 302 (Part 1): 2024.
Exemptions Provided
Limited exemptions are provided for products manufactured exclusively for export, imports for research and development purposes up to specified limits, and declared pre-implementation stock, which may be sold for a limited period subject to compliance conditions. Products already regulated under other applicable Quality Control Orders are excluded from this scope.
Industries Impacted
The regulation affects a wide range of stakeholders, including kitchen appliance manufacturers, commercial food equipment suppliers, importers, distributors, retailers, and e-commerce platforms. It also impacts hospitality and food service sectors that rely on slicing machines for daily operations.
Mandatory Compliance Requirements
Manufacturers and importers must obtain BIS certification under Scheme-I, ensure testing of products through BIS-recognised laboratories, comply with factory inspection and quality control requirements, and affix the ISI Mark on each compliant product before it is introduced into the Indian market.
Enforcement Timeline
As per the notified implementation schedule, the Order will come into force from 1 October 2026 for general enterprises, followed by 1 January 2027 for small enterprises and 1 April 2027 for micro enterprises. This phased timeline provides manufacturers and importers with a structured transition period to align their products and processes with the prescribed safety requirements and certification procedures.
Next Steps for Stakeholders
Stakeholders should immediately identify covered product categories, initiate the BIS certification process, align product design and manufacturing processes with IS requirements, and plan certification timelines to ensure smooth market continuity before enforcement dates.
Legal Provisions & Penalties
Certification and enforcement are governed by the Bureau of Indian Standards (BIS) under the BIS Act, 2016. Non-compliance may result in imprisonment up to two years, fines starting from ₹2 lakh and extending up to ten times the value of goods, or both, along with additional penalties for continuing violations.
Conclusion
Compliance with IS 302 (Part 1): 2024 and BIS certification is mandatory for slicing machines from the applicable enforcement dates. Timely compliance is essential to ensure legal market access, product safety, and avoidance of regulatory penalties.
Ready to start your certification journey?
Let us help you navigate regulatory challenges and achieve certification with ease. Leave us your details, and we’ll get back to you—or request a free consultation today.