Steel and Iron Products
Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas, and Sewage
Strategic Recommendations for Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas, and Sewage
- Start BIS Certification Immediately
Apply for BIS certification under IS 8329:2000 without delay to comply with the enforcement deadline and avoid supply disruption. - Engage ERA Compliance Experts
ERA’s team can guide you through applications, testing, ISI marking, and audit readiness to ensure smooth and timely BIS certification. - Reach Out for Support
📧 cs@eraglobal.co.in | 📞 +91 9599296331 | 💬 WhatsApp: For assistance with BIS certification, inspections, and compliance documentation. - Ensure ISI Marking & Test Certification
All Ductile Iron Pressure Pipes must carry the ISI mark and hold a valid BIS Test Certificate before sale, storage, or distribution in India. - Track QCO Updates & Subscribe ERA Newsletter
Subscribe to the ERA Newsletter for real-time updates on Gazette notifications, QCO amendments, and BIS enforcement deadlines for ductile iron products.
| Section | Details |
|---|---|
| Product Name | Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas, and Sewage |
| Applicable Indian Standard (IS) No | IS 8329 |
| Title of Indian Standard | Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas, and Sewage |
| Quality Control Order | Covered under the Ductile Iron Pressure Pipes and Fittings (Quality Control) Order), 2009 |
| Notification & Amendments | • Original QCO: S.O. 1544(E), dated 25 June 2009 • Rescinded by: S.O. 2681(E), dated 23 October 2009 • Final QCO: S.O. 2749(E), dated 30 October 2009. |
| Final Enforcement Date | 1st March 2010 |
| Objective & Scope | To ensure quality, strength, and corrosion resistance of ductile iron pipes used for water, gas, and sewage distribution through mandatory BIS certification. |
| Products Covered | Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas, and Sewage (IS 8329). |
| Exemptions | Products manufactured domestically solely for export, conforming to buyer-specified foreign standards, are exempt. |
| Industries Impacted | • Water supply and sewage systems • Gas distribution networks • Urban infrastructure and municipal utilities • Civil construction and EPC projects. |
| Mandatory Compliance | • BIS licence under IS 8329 required • ISI mark on each pipe • Products must conform to IS 8329 • Non-conforming products must be scrapped within 3 months. |
| Next Steps for Stakeholders | • Apply for BIS certification within 45 days of notification • Begin production only after obtaining a valid licence • Ensure no uncertified products are stored, sold, or distributed. |
| Legal Framework Provision & Enforcement | Issued under Section 14 of the BIS Act, 1986; enforced by BIS and the Department for Promotion of Industry and Internal Trade (DPIIT). |
| Penalties | Imprisonment up to 2 years or fine of not less than ₹2 lakh (extendable up to 10× the value of goods) or both. Continuing offences may attract an additional ₹5,000 per day fine. |
| Conclusion | BIS certification for IS 8329 became mandatory from 1 March 2010. The QCO ensures quality control in the supply of ductile iron pressure pipes used for essential utilities like water, gas, and sewage. Non-compliance is subject to enforcement actions and penalties. |
| References/Annexures | Gazette Notification: S.O. 2749(E) dated 30.10.2009; BIS IS 8329:2000 (latest version). |
Ready to start your certification journey?
Let us help you navigate regulatory challenges and achieve certification with ease. Leave us your details, and we’ll get back to you—or request a free consultation today.
Get in touch with us today
Notification
Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas, and Sewage are covered under the Ductile Iron Pressure Pipes and Fittings (Quality Control) Order, 2009 notified via S.O. 2749(E) dated 30th October 2009 by the Ministry of Commerce and Industry (Department of Industrial Policy and Promotion). This Order came into effect on 1st March 2010 under the powers conferred by Section 14 of the Bureau of Indian Standards Act, 1986 (63 of 1986). This Order superseded an earlier QCO issued via S.O. 1544(E) dated 25th June 2009, which was later rescinded by S.O. 2681(E) on 23rd October 2009.
Enforcement Timeline
The Quality Control Order became enforceable from 1st March 2010, and compliance is mandatory for all domestic manufacturers and importers.
Overview
The Order mandates that all Ductile Iron Pressure Pipes conforming to IS 8329 must be BIS certified to ensure product safety, structural reliability, and corrosion resistance for use in water, gas, and sewage applications.
Objective & Scope
The primary objective is to standardize product quality across manufacturers and prevent the circulation of substandard ductile iron pipes in the domestic market. The regulation ensures consistent mechanical strength, pressure resistance, and long service life of pipelines.
Products Covered
The standard IS 8329 applies to Centrifugally Cast (Spun) Ductile Iron Pressure Pipes designed for water supply, gas transmission, and sewage networks. These pipes are typically used in municipal and industrial pipeline infrastructure.
Exemptions Provided
Pipes manufactured exclusively for export purposes that conform to the foreign buyer’s specifications are exempt, provided such specifications are not lower than the Indian Standard requirements.
Industries Impacted
This regulation directly affects manufacturers and suppliers in the water utility, gas distribution, sewage treatment, and infrastructure development sectors, as well as public procurement agencies and EPC contractors.
Mandatory Compliance Requirements
- All manufacturers must obtain a BIS licence under Scheme-I (ISI Marking) for IS 8329.
- Products must bear the BIS Standard Mark before sale or distribution.
- Testing must be conducted in BIS-recognized laboratories to verify conformity.
- Substandard or defective pipes must be deformed and scrapped within three months of detection.
Next Steps for Stakeholders
- Apply for BIS certification for IS 8329 under Scheme-I.
- Conduct internal quality audits and ensure test results match BIS parameters.
- Label all products with the ISI mark before sale or dispatch.
- Maintain traceability and test records to facilitate BIS inspection and audits.
Legal Provisions, Enforcement & Penalties
This Order is backed by Section 14 of the BIS Act, 1986, granting wide powers to enforcement authorities. Key provisions include:
- Inspection, seizure, and sampling by designated officials such as State Industry Directors, Under Secretaries of DPIIT, or DIC General Managers.
- Search and seizure actions governed by the Criminal Procedure Code (CrPC), 1973.
- Penalties for false declarations, record tampering, and sale of uncertified products, which may include.Â
- Imprisonment up to 2 years, or
- Fine of not less than ₹2 lakh (extendable up to 10× the value of goods), or both.
- For continuing offences, an additional fine of up to ₹5,000 per day may be imposed.
Conclusion
The Ductile Iron Pressure Pipes and Fittings (Quality Control) Order, 2009 makes BIS certification under IS 8329 mandatory for all such products used in water, gas, and sewage infrastructure in India. This ensures high-quality, durable pipes are used in critical utilities and helps prevent substandard products from entering the market. The Order empowers enforcement authorities with adequate tools to inspect, regulate, and penalize non-compliance, ensuring the safety and integrity of public infrastructure.
Ready to start your certification journey?
Let us help you navigate regulatory challenges and achieve certification with ease. Leave us your details, and we’ll get back to you—or request a free consultation today.